How to replace the imaging unit chips for Konica Minolta Bizhub C25 C35

PLEASE NOTE: Our Chips intended to replace into the functional Drum Unit. If (before you replace the chip) your Drum is already printing with streaks, smudges or lines, The drum is basically already defective or exhibiting signs of defect, and replacing the chip it will not bring it back to life. Drum has multiple moving parts that do wear out and affect quality. Our chip are intended to provide the same quality prints as the last few pages that your printer printed before you replace the chip. DO NOT replace the chip in the defective Drum (imaging unit)

Tool require:

Small flat head Crewdriver

1.  1. Using the paper towel of soft cloth to cover the drum parts see Pic. Below. this very important , it will help to protect the drum unit from the light and help the cartridges to deliver the best print quality longer

2. Replace the new chip in the same orientation. if you have the drum unit that come with printer, there are just a piece plastic there, just remove the plastic and install the chip.

Please leave us a comment below if you have any questions, tips or trick to make this instruction better.